Guest
Guest
Oct 09, 2023
12:51 AM
|
china cnc machining aluminum parts
?At this moment, if the reference point is set at the rotation center of the tool post, the tool post must collide with the workpiece. To ensure that there is no collision, the reference point on the machine tool should not only be located outside the tool post, but also outside all tools. In this way, even when the tool holder is equipped with a tool, the reference point will not collide with the workpiece.
??On a milling machine, the reference points of the X and Y axes are on the spindle axis. However, the reference point of the Z axis can be set at the spindle end or at a point other than the spindle end. If it is at the spindle end, when the command is zero, the spindle end will reach the zero direction specified by the coordinate system.
??At this moment, the face key on the spindle end will collide with the workpiece: if there is a tool on the spindle, it must collide with the workpiece. To ensure that there is no collision, the reference point on the Z axis should be set outside the length of all tools. Even without additional movement, the reference point will not hit the workpiece.
cnc machining steel parts china
china cnc machining aluminum parts
|
